Cold room storage pu panels will be shipped to clients

Banana ripening cold room

Potato Cold Room Design and Installation In Nigeria

Cold room design is very important for the integral efficient, energy-saving and usage life. Onlykem Technology is the professional cold room designer and manufacturer who has more than 10 years industrial experience. Our one stop cold room solutions had been exported to over 45 countries since 2007.

Our customer from Nigeria wanted to build a cold room to keep potatoes fresh. The main storage temperature of potato cold storage is 3-10 ℃. The activity of starch hydrolyzing enzyme in potato increases at 0 ℃, the hydrolysis of starch to sugar is accelerated and the respiration is enhanced.

Potato Cold Room Design and Installation In Nigeria
https://goo.gl/s4LaZJ

Cold room floor of Pu panel with wooden blocks

Beef Room Freezer in Ghana

Beef room freezer (also known as beef freezer room ) is widely used in cattle slaughter house, beef manufacturer, supermarket, restaurant, etc. Generally, The  beef freezer room with the temperature -7 ℃ to maintain the original favor of the beef, but under that temperature, the beef could just store for few days. To storage it longer, we must put it into the freezer room with the temperature -18 ℃.

Beef Room Freezer in Ghana
https://goo.gl/gatNCy

Specifications of beef room freezer in Ghana

Beef Blast Freezer Size: 8m(L)*6m(W)*2.5m(H)

Usage: Beef manufacturer factory

Beef Room Freezer Temperature: -18℃ 

Beef Room freezer Refrigeration Unit SystemBeef Freezer room PU panel

CFC Free polyurethane insulated sandwich panel which made of  environmental friendly raw materials, no harm for beef freeze.

Thickness: 100mm, with 0.426mm thickness color steel.

Type: Built in cam lock. Fire rating: B2.

Foam time of PU panel for beef room freezer: 30-40 minute.

Condensing unit with original Germanic Bizter compressor which has advantages of large cooling capacity, spare part can be replaced.

Unit cooler with Hydrophilic foil and axial fan which has the advantages of anti-corrosion, long life span, low noise and large airflow.

Beef Room freezer Floor System

100mm PU panel and one layer anti-sliding aluminum plate.

Advantages:

Firstly, it can bear much weight on Floor.

Secondly, it is helpful for floor cleaning with it.

Last, 2.6mPa stress test before shipment for the beef room freezer air cooler and condensing unit.

Seafood Walk In Freezer Room in Australia

Walk in freezer room is the walk-in storage facility in controlled temperature which is widely used for storing the frozen seafood like the crabs, fishes and other kind seafood. For long time storing, the temperature will ranged from -18 to -25 degree celsius. And the anti- corrosion effect seems more important for storing the seafood. Our walk in freezer room will consider all points for you. Our Australia customer ordered our walk in freezer room for his seafood factory.

Anti-corrosion features of the Seafood Walk in Freezer Room
1.Aluminum hydrophilic aluminum foil.(We also call it blue fin ).
2.The surface plate of the unit cooler are galvanized.
3.The axial fan is waterproof with low noise, low abrasion, and low maintenance rate.
4.The panel surface plate steel, you can choose galvanized steel, Aluminum and stainless steel.

Seafood Walk In Freezer Room in Australia
https://goo.gl/23mchE

Fish Walk In Freezer In Thailand

Fish walk in freezer also called freezer room is widely used in Fishery/Fish plant /Supermarket /Hotel/Restaurant etc. The temperature range of frozen fish freezer room is usually keeping in -18~-25°C by insulation and cooling system , the fish is not perishable, the taste is good . ( If it is special deep-sea fish , even up to -40~-60°C , such as tuna fish cold storage. )

One of our Thailand customer customized and ordered fish cold room from us for his fish factory , here below the detailed information:

Fish Walk In Freezer In Thailand

General Information of Freezer Room For Fish       · Ambient Temperature of Thailand: Normally 30~35 degree

· Cold Room Dimension: 6mx4mx2.5m

· Usage: Walk In Freezer for Frozen Fish Storage

· Cold Room Inside Temperature: -20 degree

OnlyKem’s solution of Fish Walk In Freezer:

◎ Panel System:

-- 150mm thickness CFC-Free cam-lock connection PUF panel with 0.426mm white galvanized steel for wall , roof and floor panel.

-- 150mm thickness with 0.5mm galvanized steel , 0.8*1.8m hinged door with electric heater

Fish Walk In Freezer In Thailand

◎ Refrigeration System:

-- Original New Bitzer compressor condensing unit . Germany brand piston compressor , with large cooling capacity , suitable for fish frozen room.

-- Electrical defrost air cooled evaporator with axial fan.  Low noise and high level protection.

-- Control box and Danfoss expansion valve.

Fish Walk In Freezer In Thailand

Fish Walk In Freezer In Thailand

◎ Optional accessories:

-- Light.                     

--Balance Window.

--Glue.

--copper pipe and insulation pipe.

--PVC curtain

  

OnlyKem is professional cold room manufacturers , committed to design, manufacturer , and export our walk in freezer room , chiller room and blast freezer room.  Hope to be your partner.

#ColdRoom http://goo.gl/SifWCM  

A brief introduction of PU panel.

PU panel is also called PU sandwich panel, PUR Panel or PUF Panel in which polyurethane foam is been sandwiched between the two outer covers. The CFC-free insulated PU panel is commonly used as the cold storage panels due to its advantageous mechanical, chemical, biological and moisture properties, it is excellent to prevent thermal conductivity, restrain growth of fungi, keep out moisture ingress. We are engaged in manufacturing reliable PU sandwich panels in variegated specifications.

OnlyKem PU panels are available in customized sizes and structure for storage temperature ranges from -36°C to 10°C. The outer two layers are available in profile with zinc coated, galvanized steel, embossed aluminum and stainless steel etc., that can meet the international hygiene standards. 

A brief introduction of PU panel.

The sizes of OnlyKem PU Panel is customized by your cold room requirements, the maximum length is up to  12,000mm, the available width is 960mm or 1000mm, the available thickness is with industrial standard of 50mm, 75mm, 100mm, 120mm, 150mm and 200mm. PU panel is suitable for low and high temperature controlled applications like cold room and freezer room, it has the characteristics of good thermal insulation,  low cold air leakage,  easy to transport and install, lower running cost and higher fire resistance property. B1 and B2 grade PU panels are available for cold room. All the PU panels are connected by the easily operated built-in cam-lock.

A brief introduction of PU panel.

In recent years, we keep on investing more than 1,000,000 dollars to update the automatic manufacturing production lines and basic product facilities. Our daily PU panel output is about 3000 square meters. Our high quality PU panels have flat and elegant appearance. The foaming time of each panel is 30 to 40 minutes, so the density uniform and the size stable.

#ColdRoom http://goo.gl/SifWCM 

Cold room door with all accessories from OnlyKem

Cold room door is the entryway to cold room, it is crucial to maintain the inside condition stable and keep the cold room safe. OnlyKem has 15 years of experiences in designing and manufacturing hinged, sliding and swing type cold room doors. All our cold room doors are made with the CFC-free insulated PU panel, stainless steel or galvanized steel that meet EC/USDA international hygiene standards, they are are available in customized sizes and structure for temperature ranges from -36°C to 10°C. It has the characteristics of perfect sealing, reliable, safe and easy to operate manual or automatically.

Cold room door with all accessories from OnlyKem

For another good news I want to share with you is: In order to enlarge the influence of the fame of our company all over the world in the field of cold room,within these days, our company have a promotion for all of our goods. If we are lucky that you can give us an order these days, the sales in our company will give you a little discount. So do you want to join us ? 

#ColdRoom http://goo.gl/SifWCM 

A brief introduction about OnlyKem condensing unit

Condensing unit (also called compressor unit) is the most important part of whole cold room system. A condensing unit typically is a high side assembly of a refrigeration system.  It is an assembly of compressor, condenser, fan motor, controls and a mounting plate.  It has the function of a heat exchanger to cool down and condense the incoming refrigerant vapor into liquid and a fan for blowing outside air through the heat exchanger section to cool the refrigerant inside. Condensing units have various designs and come in many sizes ranging from small household appliance units to very large industrial units used in food and manufacturing processes.

A brief introduction about OnlyKem condensing unit

OnlyKem Condensing unit is the optimized combination of efficiency, reliability, easy installation and sound performance. It is optimized designed and manufactured to reduce installation and maintenance costs,  more efficient while making your production even more efficient and less noise impact for neighborhood.

#ColdRoom http://goo.gl/SifWCM 

Blast Freezer project for Beef in Peru

Blast Freezer for Beef is the kind of blast freezing freezer room which is very popular and necessary in beef, processing factory. Fresh beaf must be frozen by beef blast freezer in a short time to keep its best taste to satisfy the consumer’s higher demands. The blast freezing meat can be transported or stored in longer time and in fresh quality with the help of the freezer room.

Blast Freezer project for Beef in Peru 

Our Peru customer ordered movable module blast commercial freezer for cattle slaughter factory. We designed blast freezer container on the base of a 40HQ reefer container for him.


https://goo.gl/dLLMvS

Beer Cold Room is Successfully Running in USA

Beer cold room is widely used to keep all kinds of beer at all times in right condition and fresh quality. Non-refrigerated storage will accelerate beer aging and flavor losing. One study showed that the same flavor will last when being stored in your car’s trunk for three days at 90°F as beer being stored at room temp (72°F) for 30 days and beer being stored at 38°F for 300 days. So cold room for is your best choice to store draft beer and many craft beers. Now our beer cold room have been running steadily in USA for more than one year. Our customer is satisfied with our professional cold room solution.

Beer Cold Room is Successfully Running in USA

The general information of the cold room for beer storage is as followed.

     The highest ambient Temperature of New York is about 23 ⁰C;

     The Beer Cold Room Dimension is 600mm*400mm*300mm;

     Cold room for Draft Beer Factory;

     Cold room inside temperature is 3 ⁰C;

     Humidity in beer cold room is 75%.

 OnlyKem beer cold room solution and configuration are as listed.

         100mm CFC FREE PU panel with 0.5 mm thickness galvanized steel；

         1.8m*2.5m cold room sliding door；

         XPS and concrete floor, because of forklift in beer cold room;

         Copeland ZB scroll compressor condensing unit;

          Electrical defrost air cooled evaporator with axial fan;

          Electrical panel for refrigeration unit;     

          Danfoss TX valve;

         Humidifier for Humidity Control.

Beer Cold Room is Successfully Running in USA

Just as we know, temperature is the most important factor to affect beer storage quality. It also can become a real balancing act. Beer benefits from cool constant temperatures, 45-50 degrees F is ideal temperature for most beers. Higher temperatures will put your beer in the risk of shorter lifespan, on the other hand, lower temperature will induce chill haze (cloudy).

There are 3 storage temperatures used to lay beer down for maturation and/or storage. Your strong beers (like barleywines, tripes, dark ales) will be their happiest at room temperature (50-55F), most of your standard ales (like bitters, IPAs, dobbelbocks, lambics, stouts, etc) will be at cellar temperature (45-50F) and your lighter beers (like lagers, pilsners, wheat beers, milds, etc) will be at a cold room temperature (40-45F). Usually the higher alcohol likes the higher temperature and lower alcohol likes the lower temperature. 

OnlyKem Technology provides not only beer cold room solution, but also anything needs cold storage rooms, we hope to be your cold storage partners.

Company Profile--cold room, freezer room and condensing unit.

Cold room supplier: Onlykem Technology Co., Ltd. is the leading cold room and refrigeration unit designer, manufacturer and exporter dedicated in supplying finest quality cold room solutions to worldwide customers. We have over 20 professional cold room experts and 8,000 square meters factory. Our innovative, high quality products and solutions include Cold Room, Freezer Room, Unit Cooler, Condensing Unit,  Cold Room Door, PU Panel, etc.

Product innovation, quality assurance and customer satisfaction are our long term commitment to our partners. We have been kept on investing in technological innovation and product optimization with our more than 20 talented experts. Cooperated with domestic famous universities like Shandong University and Shandong Construction University in cold room control system, structure design and refrigeration system optimization, we had got more than 10 patents, and become the leading cold room solution brand in China

Depending on the supply chain and the manufacturing competitive advantages, some factories are wholly-owned subsidiary and some are our joint ventures. They are located in different cities and integrated with each other to form the whole cold room solution with high quality and competitive cost products. In recent years, we had invested more than 1,000,000 dollars into our modern manufacturing factory to improve the basic production facilities , working conditions, employee salary and welfare, technical and teamwork training, etc. Our modern factory is equipped with advanced processing machines, which give us the power to keep high product quality, shorter delivery time and competitive cost to meet the demands of our worldwide customers. Most of our products had been kept up with the international forefront counterparts, some of them have enjoyed leading position, especially  remote monitor and control system, condensing unit and PU Panels.

We had provided many types of effective and states of the art cold rooms to over 45 countries. Our customers are from Swiss, Sweden, Australia, USA, Canada, New Zealand, Japan, Pakistan, Spain, India, Malaysia, Singapore, Malaysia, Philippines, South Africa, Argentina, Indonesia, Kenya, Algeria, Ghana, Guyana, Mongolia, Chile, Peru, Dubai, Poland, Mexico, Brazil, Lebanon, Thailand, Kazakhstan, Turkmenistan, Bangladesh, Colombia, Bahrain, and so on.

We are willing to become your partners with our high cost-performance work wear products, excellent quality and perfect after-sale service. Hope to become your cold room partners.

OnlyKem Technology, Cold Room Expert.

Cold Room for Dates Solution for Pakistan Customer

Cold room for dates is the commonly used facility to keep dates in fresh quality. Pakistan date is well know for its sticky sand between fiber, pure and fresh, thoroughly sweet. OnlyKem is the turn key cold room solution supplier, all our cold storage rooms can be customized to satisfy your cold storage requirements with any customized size.

Cold Room for Dates Solution for Pakistan Customer

Pakistan customer wanted to procurement cold room for date storage. Before our customer came to China, he had received several suppliers’ cold room proposals. After compared about company technology and strength, he finally came to our company and discussed date cold storage solution in detail with us. Normally date palm is popular in the tropical and subtropical area in Pakistan, Middle-East, North Africa, etc.

Our customer has the leading date processing technology and date production line in Pakistan for three generations. He is very professional, he checked our sample cold room carefully, such as axial fan unit cooler, Danfoss expansion valve, XPS panel, electrical panel for refrigeration unit, PU panel sliding door with releasing system, galvanized steel PUR panel, LED light for cold room, cam-lock for cold room panel…

This is not the first time to use cold rooms for his dates. So we had a professional communication with each other about cold room configuration, capacity, size, installation, etc. our engineer got to know dates quantity, humidity and temperature according to his special date production process. And then, we designed these three cold rooms capacity again. Because factory lies in the tropical area, so we chose original Bitzer semi-hermetic piston compressor for OnlyKem condensing units. These three date cold rooms will build in original warehouse, there are so many pillars in it. We have to make special design for them in order to prevent cool leakage of cold rooms. For these pillars, we also need supply customized dimension with our CFC Free PUF panel.

He also visited our CFC Free PU panel factory ad was satisfied with our raw material quality, production process and quality control about final PUR panel, especially our auto hydraulic pressure production line.

Cold Room for Dates Solution for Pakistan Customer

“Amazing visit👀!” he said. Before he left, he signed the contract for 3 sets of date cold rooms and promised immediate payment. We will corporate with each other to supply optimized and qualified cold rooms for date storage.

Cold room manufacturer with good quality

Cold rooms are the effective facilities to keep the finest quality of stored products like fruit, vegetables, beverages, flowers, meat, seafood, medicine, cheese, eggs and other fresh foods, they are walk-in storage facilities in controlled temperature conditions. Onlykem Technology Co., Ltd is the leading cold room and refrigeration unit designer, manufacturer and exporter dedicated in supplying finest quality cold room solutions to worldwide customers. 

We have over 20 professional cold room experts and 8,000 square meters factory. Our innovative, high quality products and solutions include Cold Room, Freezer Room, Unit Cooler, Condensing Unit,  Cold Room Door and PU Panel, etc. Product innovation and customer satisfaction are our long term commitment to all our partners. OnlyKem had been always worked hard to become the leader in providing customized cold storage solution to meet your refrigeration demands since its foundation in 2002. Hope to be your cold storage partners.

#Coldroom https://goo.gl/SifWCM 

Cold Room - Onlykem Brand

Cold room (also called cool room, chiller room) is a walk-in storage facility in controlled condition to keep a consistent temperature, it is widely used to preserve the quality of stored products like fruit, vegetables, beverages, flowers, beef and chicken meat, seafood, medicine, cheese, eggs and other fresh foods. The applications of cold rooms include foods and beverages packaging, short and long term products cold storage as well as blast freezing. With 15 years of experience, OnlyKem had been enjoying leading positions in designing and manufacturing cold storage room with our 20 talented experts and state of the art manufacturing facilities. 

Cold storage room is the effective facility to keep quality of stored products like fruit, vegetables, beverages, flowers, beef and chicken meat, seafood, medicine, cheese, eggs and other fresh foods. It is widely used in restaurants, hotel, food shops and supermarkets, etc al. We are always providing one stop solution to worldwide customers. All our cold rooms can be customized for your requirements. OEM and ODM are also available.

V Type Air Cooled Condenser KM-1600 was Successfully Developed

V Type Air Cooled Condenser is the main component of condensing unit, it is available in a wide ranges of condensing performance, different noise levels and naturally suitable for outside installation. It is easy to install and maintain, has high operational reliability and leak-safety, so it is widely selected for cold rooms. OnlyKem has 15 years of experiences for air cooled condenser development according your cases of application.

Our long-term partner from Chile is the designer and manufacturer of rack condensing unit with Bitzer compressor, OnlyKem designs and manufactures other matching cold room components to satisfy his requirements. We had been worked closely with him to provide cold room solutions for long time. At this time, he asked us to develop Air Cooled Condenser for his supermarket refrigeration system in Chile.

V Type Air cooled condenser KM-1600 was successfully developed

According his requirements and specifications,  our engineers specially designed and optimized a 1600 m²  V Type Air Cooled Condenser, it is designed with hydrophilic aluminum foil which is better for anticorrosion,  because the V Type air cooled condenser will be installed in Chile city near the sea. 

Air Cooled Condenser is a heat exchanger to cool down and condense incoming refrigerant vapor into liquid in the refrigeration process. It is a direct air dry cooling system where the refrigerant is condensed inside air-cooled finned tubes without water loss, so the overall performance is better. OnlyKem can design and manufacture different sizes and capacities of air cooled condensers to satisfy your demands, OEM, OEM is also available.