2018年12月24日星期一

Turn Key Cold Room Construction in Myanmar

Turn Key Cold Room Construction in Myanmar

Turn Key Cold Room is for all of your cold storage requirements including cold room design, cold room manufacture and cold room installation. Kindly let us know your detailed requirements, such as the usage, temperature, or your special request on budget or energy saving. We can design a high – efficient and economic solution according to all of your requirements! Turn key cold room construction in Myanmar was just finished by OnlyKem team. There are some details about this cold room project, we hope that next cold room project is for you!
Turn Key Cold room specifications in Myanmar

Cold room usage: For frozen spinach storage

Cold room external dimension: 37200mm*23460mm*6450mm

Cold room layout: total six cold rooms and one corridor

Cold room insulation panels: 150mm thickness PU sandwich panels with good insulation effect, there is no cold losing, it will save power for customer.

Floor of cold room: XPS panel + cement. Customer need to drive forklift into cold room for loading and unloading goods, so we designed this floor system, it is strong enough to bear it.

Cold room temperature: -25 degrees celsius, keep spinach be frozen.

Ambient temperature in Myanmar: +45 degrees celsius.

Our solution as follows:
1.Condensation method: Evaporating cooled condenser.

Turn Key Cold room drawing

Ambient temperature in Myanmar is very high in summer, it can reach 45 degrees celsius even more higher temperature, air cooled condenser is not workable, because air cooled condenser uses hot air as medium for the heat exchange, it is not efficient with so high temperature.

Finally our engineer chose evaporating cooled condenser, in this solution, it uses water and air as cooling medium exchanges the heat with high-heat gaseous refrigerant medium and hence the refrigerant medium becomes liquid. Inside, there is water distribution system, heat exchange coil, Outside, there is water circulating pump, electronic water curing device and propeller fans on the top of heat exchange coil. Evaporating cooled condenser will be more and more popular in the tropical area.

Advantages of evaporating condenser:

Excellent heat exchange performance with water

Convenient and realizable on-line maintenance

Small floor space and low investment

Convenient transportation and installation

Low operating cost and energy saving

Low fault rate

Slope collecting basin with convenient clean out

2. Compressor unit type: Origianl new German Bitzer brand, screw compressor, parallel system.

Evaporating cooled condenser

Electricity is very expensive in Myanmar, so customer wants the energy saving solution; Besides, sometimes they don’t put full frozen spinach in the Turn Key cold room, so all compressors don’t need to work all the times. Considering these points, our engineer suggested that parallel system for customers.
Parallel system of Bitzer compressor unit

Advantages of parallel system:
Integrated PLC control system.
Automatic control system: it can adjust the number of working compressors automatically according to the cooling capacity required in cold room. It means that not all compressors keep working always, so it is energy saving than the single unit.
Remote monitoring system: we can help customers debug machine in China, so it can realize online-service in the future, it is very convenient and in-time after – sales service.
Backup function: If one compressor has problems, other compressors can replace it for working. It can keep cold room temperature continuously. Spinach won’t be affected because of the sudden problems.
Long lifespan: Because it can adjust the compressor working time automatically according to the cooling capacity required, so the compressors have time of rest, their lifespan is about 30% longer than the single unit.
OnlyKem installation team for Myanmar Turn Key cold room project!

Myanmar cold room project PU panel installation

Our experienced refrigeration engineers worked for designing and installation guiding for customer. There ware three stages for the whole installation.
Firstly our engineer inspected customer’s site, in order to check if it is suitable or advantageous for good running and installing of machines, our engineers gave some useful suggestions in this stage, such as we suggested customer utilizing high quality water, because evaporating cooled condenser need water as heat exchange medium, low quality water will have water rust or impurity, after long time, it will reduce heat exchange rate.
Secondly, our engineer designed professional drawing according to actual site, it is helpful for the fast installation. With the drawings, installation team understood some details very easily and clearly.
Thirdly, our engineer helped debugging machine until they worked well!

From ordering to installation implementation of Turn Key cold room, our Myanmar customer felt OnlyKem team’s enthusiasm and profession. We had provided many types of effective and states of the art cold rooms to over 45 countries. Our customers are from Swiss, Sweden, Australia, USA, Canada, New Zealand, Japan, Pakistan, Spain, India, Malaysia, Singapore, Myanmar, Philippines, South Africa, Argentina, Indonesia, Kenya, Algeria, Ghana, Guyana, Mongolia, Chile, Peru, Dubai, Poland, Mexico, Brazil, Lebanon, Thailand, Kazakhstan, Turkmenistan, Bangladesh, Colombia, Bahrain, etc. If you have requirements on cold room in future, OnlyKem is a good choice for you!

2018年12月19日星期三

OnlyKem Cold Room Sliding Door with PU Panel

OnlyKem Cold Room Sliding Door with PU Panel

OnlyKem Cold Room Sliding Door (horizontal sliding door) with PU panel is designed and manufactured completely cold – bridge free. OnlyKem brand cold room sliding door is well know for high recycle, durability and excellent thermal properties. Most of the cold room sliding door is horizontal sliding door that easy to operate manually or automatically. OnlyKem brand cold room sliding door is made with the CFC free insulated PU panel, stainless steel or galvanized steel that meet EC/USDA international hygiene standards, they are available in customized size and structure for temperature range from -36°C to 10°C.
medium duty sliding door

Features of OnlyKem cold room sliding door with PU panel
Sliding door is equipped with escape device system.
Can be customized according to customer’s actual situation.
The internal component is PU panel with better insulation effect, poor thermal conductivity and long service time
According to customer’s actual situation, the external material can be customized. 304 stainless steel, galvanized steel and 316 stainless steel are optional. OnlyKem cold room sliding door has the characteristics of Good stability, anti corrosion and beautiful.
For large size cold room, it is convenient for customers to use forklift, loading and unloading
Sliding smooth, durable.
Good impact resistance, increased the strength of the door.
The sealed insulation property effect is good. Save electricity.
Stainless steel accessories. Anti – corrosion, beautiful and long service life.
Reasonable packaging to ensure long- distance transport quality.
cold room sliding door

Detailed information of OnlyKem cold room sliding door with PU panel

Cold room door panel is joined together by means of tongue and groove and locked together by cam – lock on each side of the pu panel to ensure air tight joints.

Cam-lock design fastener to install with the cold room tightly and strongly.

Silica gel are used on the cold room door panel edge of the joint parts of each sandwich panel to ensure perfect sealing to avoid the cooling air leakage from the cool room for moisture inside the PU insulated panel for the best refrigeration and frozen storage result.
sliding door drawing for cold room

Product featureStandard configurationOptions
Door leaf RAL9010 color steel panel Green yellow red blue color steel or SS 304
Door edge Aluminum alloy Stainless steel
Lead rail Aluminum alloy Stainless steel
Door frame Plastic wood PVC
Door sill / /
Door lock /ART. 94
Double door / Can be provided
Electric system / Full set of MTH automatic system
Porthole / Can be provided
Auto sliding door or common sliding door size :
Door thickness75mm,100mm,150mm, 200mm
Namewidth (mm)height (mm)
Sliding door9001800
12002000
15002200
18002400
26002800
18002500
30003000
Specification of cold room sliding door
Cold room door material100% polyurethane foaming material BASF
Cold room door  density43kg/m
Thickness75mm,100mm,150mm, 200mm
Steel plate optionalPainted galvanized steel, stucco embossed aluminum, stainless steel
Door type optionalFlush door,convex hinged door, electric / manual sliding door , glass door , swing door

Horizontal sliding door:

double sliding door

Single leaf OnlyKem cold room sliding door with PU panel. More suitable for loading and unloading. Beautiful appearance.
sliding door for America

PU panel of OnlyKem sliding door

Sliding door insulation material is very suitable for insulation which has many features like low thermal conductivity, good insulation, good stability, long service time, light capacity, high strength, heat insulation, sound insulation, flame retardant, anti- corrosion, non- absorbent, quick construction.

Excellent thermal insulation properties can achieve the same insulation requirement.

High density. Good insulation, hing compressive ability.

Environment friendly. Doesn’t produce harmful gases even if under high temperatures.

Can be customized. According to customer’s requirement to match suitable thickness. Also ensure insulation effect and sufficient support strength.

Application of OnlyKem cold room sliding door with PU panel

OnlyKem cold room sliding door with PU panel is commonly applied to the walk in cold room, freezer room, blast freezer room with wide range of room temperature. The cold rooms with sliding door are widely used in milk factory, slaughter factory, supermarkets and food industry like food shops, restaurants, catering unit, bakeries and ice-cream parlors, hotels.
color steel sliding door for cold storage

OnlyKem Technology Co., Ltd is the leading cold room and refrigeration unit designer, manufacturer and exporter dedicated in supplying finest quality cold room solutions and cold room installation to worldwide customers, we have experienced cold room installation team, choose OnlyKem, there is no worry about cold room installation. Welcome for your cold room requests, looking forward to cooperate with you in near future!

2018年12月13日星期四

Chiller Cold Room for Nuts in Saudi Arabia

Chiller Cold Room for Nuts in Saudi Arabia


Chiller Cold Room for Nuts is a perfect cold storage room project to store nuts in Middle-East Area. It won a good reputation from our customer. Thus, our customer gave us a good feedback.

freezer cold room for nuts in Saudi Arabia


1. Chiller cold room for nuts in Saudi Arabia has a customized design.

Panels System of Chiller Cold Room for Nuts in Saudi Arabia
According to our experience, the storage temperature for nuts will be -5~+5℃. Normally the panel we used is 100mm PU panel if the temperature is -5~+5℃. Because of hot weather and dry environment in Saudi Arabia, we confirmed finally the thickness is 120mm after we talked about with technician department. So that we can promise the temperature well and store the nuts well. And the surface material, what we used for this project is 0.5mm color steel. It can protect the chiller cold room for nuts avoiding the damage from weather. Thus, the cold room can be used more times.

Chiller cold storage for nuts in Saudi Arabia

Refrigeration Unit System of Chiller Cold Room for Nuts in Saudi Arabia
As we all know, the nut has a high requirement on the store temperature. We must control the temperature strictly. So we need to design a refrigeration system which can brings large cooling capacity for the chiller cold room for nuts in Saudi Arabia.
According to our experience, the compressor we used for this project is Bitzer compressor. Bitzer, a famous brand from Germany. This compressor has a large cooling capacity and it can suit bad weather environment. After our deep discussion, finally we designed Bitzer compressor for this chiller cold room for nuts in Saudi Arabia. And,according to our market survey, Bitzer compressor is very popular in Saudi Arabia and its around area.

What’s more, the condenser has a double area based on normal condenser. Because the weather in Saudi Arabia is very hot. In order to let the heat spread out more efficiently, our engineer suggests that add extra area for condenser. Enough area can help the wind bring the heat out more efficiently though the weather is very hot.
So, please do not worry about the cooling efficiency, our engineer who has more than 15 years experience can make a perfect proposal for you.

Chiller cold room for condensing unit


2.Chiller cold room for nuts in Saudi Arabia has a low cost of installation

There are many customers worry about this problem, how can they install the cold room? Is the installation very difficult?
As a professional cold room supplier, we have put these problems into our consideration. Our aim is provide the most convenient proposal for our customer. Try our best to let our customer save the cost of installation.
Panels Connection of Chiller Cold Room for Nuts in Saudi Arabia
The panel connection is Cam – Lock. When we make the panels, we put cam – locks into the panel. According to the workers experience, every cam – locks will be on their position exactly. After we put the panels together, we use the handle to lock the cam – lock. Very easy to do this. Then the panels connection is finished.
Installation Drawing of Chiller Cold Room for Nuts in Saudi Arabia
When we arrange the production, we always make a CAD drawing.In order to let our customer beconvenient when they install the chiller cold room, we also send this drawing to customer. Every panels has their position so that we can install the chiller cold room more clearly.

cold storage room for fruit


3. Chiller cold room for nuts in Saudi Arabia has all certifications.

As we all know, we must make a certification for the goods if we want to export our goods to Saudi Arabia. According to SASO, we need to make a COC certification on the goods. No certification, no export.
It means our goods must have a high quality. Fortunately, with our high attention on goods and production, our goods can meet the standard of Saudi Arabia Government. So surely we can get the certification from SASO.
Not only SASO, but some customers also need CCPIT certification. So it means there is a higher standard on our goods. And we also need to pay more money on it. But do not worry. We can do it! What’s more, we always do it for our customer freely.
With our many years experience, we know what documents the Custom need and we also can get those documents with a low price. So please do not worry about the documents of Custom. OnlyKem will give a perfect solution.

refrigeration cold room for nuts in Saudi Arabia

The chiller cold room for nuts in Saudi Arabia has been finished for a couple weeks. From the feedback of customer, everything goes well. And, it is our pleasure to build the chiller cold room for nuts for customer in Saudi Arabia.